• By admin
  • Comments are off

WetLOOK Stabilizing Sealer coats and seals the pavers’ surface creating a wet look with a semi-gloss finish creating a protective barrier while simultaneously stabilizing the paver joint sand.

-LIQUID STABILIZER: Liquid joint sand stabilizer that offers superior water resistance in all climates on many types of projects for longer than other types of stabilizers.
-WET LOOK: Creates a significant color enhancement with satin to semi-gloss finish depending on the number of coats.
-SEMI-GLOSS FINISH: Creates an enhancing semi-gloss sheen on the paver surface.
-DURABILITY: Surface protection that lasts for 2 – 3 years.
-NO WEEDS, NO INSECTS: Reduces growth of weeds and deters ants and insect infestation.
-IMMEDIATE APPLICATION: Recommended immediate application after sanding and detail cleaning.
-BREATHABLE: Will not trap moisture or efflorescence and haze or whiten.
-STAIN PROTECTION: Reduces staining by slowing down penetration of more types of stains into paver surface.
-IMPROVES STRUCTURAL INTEGRITY: Increases interlock and reinforces joint sand and reduces the need for re-sanding.
-ALLOWS AGGRESSIVE CLEANING: Cured liquid stabilizer sand joint resists washout and tracking into homes and pools.

Pavers – 50 – 125 sf/gal
Paver Slabs – 20 – 60 sf/gal
Wetcast Pavers – 30 – 70 sf/gal
Porous Natural Stone – 75 – 300 sf/gal

Dry time:
Surface should dry to the touch within 15 minutes-1 hour. Set up takes 1-2 hours after drying has occurred.

Cure time:
24 hours for initial joint sand stabilization, but complete curing will take additional time.