IN STOCK
Glaze 'N Seal
Wet Look Green
Clear acrylic lacquer sealer that leaves a glossy, wet-looking finish.
View Details
Sealers & Surface Treatments
Protect & Enhance Your Hardscape
Professional-grade sealers and surface treatments for pavers, natural stone, concrete, decorative gravel and other hardscape applications.
Start Here
What Are You Working On?
Start with the surface you are treating, then browse the products we carry.
Concrete PaversProtect and enhance patios, walkways and driveways.See BP ProNatural StoneExplore treatments designed for natural stone applications.See Glaze 'N SealBrick & Clay PaversProtection and finish options for clay and masonry surfaces.See productsDecorative GravelProducts for stabilizing certain decorative aggregate applications.See TechniSoilPathways & DGStabilization products for decomposed granite and pathway applications.See TechniSoil
These are the lines we usually point people to, not compatibility lists. Not every product on this page is made for every surface shown above — check the manufacturer’s own product information, or ask our team.
Finish & Performance
What Result Are You Looking For?
Choose a result to narrow the product list below. Products are only grouped here where the manufacturer states the finish.
Two products — a slip-resistant additive and a sub-surface weed treatment — are not a finish category and appear only in the full list.
Products We Carry
Sealers & Surface Treatments
Sizes shown are what we carry. Call or visit the yard for pricing and current quantities.
Glaze 'N Seal
Manufacturer SiteWe sell the Glaze 'N Seal line mainly for concrete, stone and veneer stone.
Glaze 'N Seal
Wet Look Green
“A revolutionary super low VOC formula offering a crystal clear acrylic with ultimate stain protection.”
- Listed by maker as
- Wet Look Lacquer Green
- Finish / result
- Wet look / high gloss. Manufacturer states it is non-yellowing.
- Maker lists it for
- Decorative concrete, pavers, masonry, porous tile and stone.
- Sizes we carry
- 1 gallon, 5 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCK
Glaze 'N Seal
Penetrating Sealer Extra Strength
Penetrating sealer that protects without changing the natural appearance of the surface.
View DetailsGlaze 'N Seal
Penetrating Sealer Extra Strength
“Extra strength formula for longer lasting protection against water, dirt and mildew stains on most concrete and masonry surfaces.”
- Listed by maker as
- Extra Strength Natural Look Penetrating Sealer
- Finish / result
- Natural look. Manufacturer lists "natural look" as a product feature.
- Maker lists it for
- Porous concrete, masonry and stone surfaces.
- Base
- Water based, low VOC (manufacturer stated).
- Sizes we carry
- 1 gallon, 5 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCK
Glaze 'N Seal
Wet Look WB
Water based version of the wet look sealer, for a deepened finished appearance.
View DetailsGlaze 'N Seal
Wet Look WB
“Wet Look WB is a durable water based sealer designed to give the surface that deepened "Wet Look" appearance.”
- Listed by maker as
- Wet Look Water Based Sealer
- Finish / result
- Wet look, medium sheen film-forming finish.
- Maker lists it for
- Slate, concrete, flagstone, quarry tile, decorative concrete, exposed aggregate, pavers, natural stone and porous tile.
- Base
- Water based acrylic, low VOC, non-flammable (manufacturer stated).
- Sizes we carry
- 1 gallon, 5 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCK
Glaze 'N Seal
Multi Purpose Sealer
Clear acrylic water based finish for a range of tile, concrete and masonry surfaces.
View DetailsGlaze 'N Seal
Multi Purpose Sealer
“A clear acrylic waterbase finish designed to protect and beautify tile, concrete and masonry surfaces.”
- Finish / result
- Medium gloss. Manufacturer states it is non-yellowing and UV resistant.
- Maker lists it for
- Unglazed tile, stamped and exposed aggregate concrete, brick, natural and manufactured stone, stucco and slate; indoor or outdoor.
- Base
- Water based acrylic, low VOC (manufacturer stated).
- Sizes we carry
- 1 gallon, 5 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCK
Glaze 'N Seal
Grip 'N Seal
Anti-slip additive mixed into a coating type sealer or paint - not a sealer on its own.
View DetailsGlaze 'N Seal
Grip 'N Seal
“A unique micronized polymer powder which when mixed with a coating type sealer or paint creates a textured, slip resistant surface without a sharp abrasive finish.”
- Listed by maker as
- Grip 'N Seal Additive
- Finish / result
- Adds slip-resistant texture. Manufacturer states it does not alter the sealer's appearance.
- Maker lists it for
- Concrete, decorative concrete, unglazed tile, stone, masonry and brick. Manufacturer states it is not recommended for use in penetrating sealers or stains.
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
BP Pro
Manufacturer SiteBP Pro is made specifically for sealing pavers.
IN STOCK
BP Pro
Natural Stabilizing Sealer
Seals the paver surface with a natural look while bonding the joint sand.
View DetailsBP Pro
Natural Stabilizing Sealer
“Seals the surface of the block pavers creating a natural look with a satin finish while simultaneously bonding the paver joint sand.”
- Listed by maker as
- NSS Natural Stabilizing Sealer
- Finish / result
- Natural look, satin finish.
- Maker lists it for
- Interlocking concrete pavers, paver slabs, brick pavers and natural stone.
- Sizes we carry
- 1 gallon, 5 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCK
BP Pro
Enhanced Stabilizing Sealer
Seals the paver surface and enhances the color of the pavement while stabilizing joint sand.
View DetailsBP Pro
Enhanced Stabilizing Sealer
“Coats and seals the pavers surface while simultaneously stabilizing the paver joint sand. Enhances the color of the pavement.”
- Listed by maker as
- ESS Enhancing Stabilizing Sealer
- Finish / result
- Color enhancing.
- Maker lists it for
- Concrete pavers, paver slabs, porous natural stone and concrete.
- Sizes we carry
- 1 gallon, 5 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCK
BP Pro
WetLook Stabilizing Sealer
Creates a wet look semi-gloss finish while stabilizing the paver joint sand.
View DetailsBP Pro
WetLook Stabilizing Sealer
“Coats and seals the pavers surface creating a wet look with a semi-gloss finish creating a protective barrier while simultaneously stabilizing the paver joint sand.”
- Listed by maker as
- WSS WetLook Stabilizing Sealer
- Finish / result
- Wet look, satin to semi-gloss depending on the number of coats applied.
- Maker lists it for
- Interlocking pavers, paver slabs, wetcast pavers and porous natural stone.
- Sizes we carry
- 1 gallon, 5 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
TechniSoil
Manufacturer SiteStabilizers for pathways, decorative gravel and landscape ground cover.
IN STOCK
TechniSoil
G3 Pathway Stabilizer
Liquid polymer stabilizer for decomposed granite and crushed stone pathways.
View DetailsTechniSoil
G3 Pathway Stabilizer
“An easy-to-use liquid polymer stabilizer for natural pavement.”
- Finish / result
- Surface stabilization. Manufacturer positions it for pathways, patios, fire pits and landscaping.
- Maker lists it for
- Decomposed granite and crushed stone, residential applications.
- Base
- Water based, VOC free (manufacturer stated).
- Sizes we carry
- 1 gallon, 5 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCK
TechniSoil
NanoPave 2.0
Two-in-one joint stabilizer and sealer, offered in a natural or an enhanced finish.
View DetailsTechniSoil
NanoPave 2.0
“2-1 advanced technology for joint stabilization and sealing.”
- Listed by maker as
- NanoPave JSS (2-in-1 joint stabilizer & sealer)
- Finish / result
- Manufacturer offers two finish options: Natural Look or Enhanced Finish.
- Maker lists it for
- Pavers, stone, brick and flagstone; manufacturer states joints up to 4 inches wide.
- Sizes we carry
- 1 gallon
- Availability
- In stock at our Simi Valley yard
The manufacturer currently lists this product as NanoPave JSS. Please contact us to confirm which version and finish we can supply.
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCKTechniSoil
TechniSoil
BarkBinder
Topical liquid stabilizer that holds shredded bark, mulch and pine straw in place.
View DetailsTechniSoil
BarkBinder
“BarkBinder topically applied liquid stabilizer acts like "hairspray" for shredded bark, mulch ground cover, pine straw, and more.”
- Finish / result
- Surface stabilization. Manufacturer states it also works as a sealant to protect and retain the color of the bark or mulch, and reduces water and wind erosion.
- Maker lists it for
- Shredded bark, mulch ground cover and pine straw. Manufacturer states it works best with fibrous bark.
- Base
- Concentrate that dilutes with water (manufacturer stated).
- Sizes we carry
- 1 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
IN STOCK
TechniSoil
EkoFlo
“A permeable pebble binder designed for use with "water-washed" (round) pebbles.”
- Listed by maker as
- EkoFlo Pebble Binder
- Finish / result
- Binds pebbles into a solid, permeable surface while leaving the pebbles visible.
- Maker lists it for
- Round / water-washed pebbles; walkways, patios, paving joints and tree wells.
- Sizes we carry
- 1 gallon
- Availability
- In stock at our Simi Valley yard
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
AVAILABLE TO ORDER
TechniSoil
Liquid Weed Fabric
A pour-on alternative to synthetic weed fabric, applied under the finished surface.
View DetailsTechniSoil
Liquid Weed Fabric
“A chemical-free, non-synthetic alternative to weed fabric.”
- Maker lists it for
- Beneath decorative rock, under landscape mulch, as a subbase for synthetic turf and on exposed dirt.
- Availability
- Not stocked - we can order it in
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
AVAILABLE TO ORDER
TechniSoil
Ground Cover Stabilizer
Locks in the surface of decomposed granite, crushed stone and blended ground cover.
View DetailsTechniSoil
Ground Cover Stabilizer
“Keep your natural look and texture, locked in.”
- Finish / result
- Surface stabilization that maintains the existing look and texture.
- Maker lists it for
- Decomposed granite, crushed stone mixes and blended ground cover.
- Availability
- Not stocked - we can order it in
Product information above is taken from the manufacturer’s own product page. Coverage, preparation and application details are not listed here — please follow the manufacturer’s instructions.
No products on this page are listed by their manufacturer under that result. Show all products above, or contact us and we’ll help you find the right one.
IN STOCK means we keep it at our Simi Valley yard. AVAILABLE TO ORDER means we can bring it in for you. Stock moves, so call ahead for larger quantities. Coverage and application rates vary by product, surface and method — always follow the manufacturer’s instructions.
Product Help
Not Sure Which Sealer You Need?
The right product depends on the surface you're working with, the look you want and the existing condition of the material. Bring us a photo or sample and our team can help you choose the right product for your project.
Related Materials
Complete Your Project
Everything your job needs, from one yard.
Interlocking PaversAngelus paving stones for patios, walkways and driveways.Polymeric Joint SandJointing sands in our bagged products line-up.Natural StoneFlagstone and natural stone for hardscape projects.Decorative GravelSand, gravel and decorative rock by the yard.Masonry ToolsTools for installation and application.DeliveryDelivery throughout Ventura and Los Angeles counties.
Need Help With Your Project?
Tell us what you're working on and we'll help you find the right materials.
